Please note: To install a Kallo device on site, the location must have previously been set up through the Ranlytics health monitoring workbench using a company admin log in.
The installer must also have a company log in and a smartphone or tablet device with an internet connection.
Log in to the Ranlytics Dashboard
Using Google Chrome, go to app.ranlytics.com to log in to Ranmonitor.
Navigate to Network Health Monitoring Workbench
Click on the Relevant Site (place of install)
The map on the screen will display a range of different sites on a map. Click the site representing your current location on the right-hand side panel.
Select your Level/Zone
This is the site page. From here you can select any of the levels or zones where a Kallo has been designated.
Click on the “go to” icon on the relevant level where the device is to be installed.
Identify KALLO Location on Map
The map on the screen will display the predetermined locations for the devices to be installed (under heading “planned units”). Proceed to the specified location to install the device.
Proceed to Location and Identify Ideal Install Location
The map on the screen will display the predetermined locations for the devices to be installed. Proceed to the specified location to install the device.
Enter KALLO Serial Number
By QR Code. The QR code is located on the KALLO label at the bottom of the unit. It is accessible even once installed.
By Manual Input. The KALLO's serial number is located on the underside of the unit and may not be visible once installed.