CERNO 4.0 Controllers:
1 x USB-C PD input (Recommend 10W power)
2 x CAT-6 Ethernet ports
CERNO 4.0 Modules:
1 x USB-C PD input (Recommend 40W power)
2 x CAT-6 Ethernet ports
6 Nano SIM card slots (3 on each side)
Inserting SIM cards:
SIM cards are hot-swappable (can be replaced without restarting, but swapping mid-log file invalidates the log file)
SIM slots are labelled 1-6, matching HEMs in the CERNO Module
Insert SIM cards facing the front (toward the mounting pins)
When inserting a SIM card, ensure the indented corner faces away from the PIN at the top or bottom of each slot
SIM cards will click into place when successfully inserted.