Connecting to the CERNO Network
Wired Connection
Plug an ethernet cable from one of the CERNO Controller’s ethernet ports into your device.
Wireless Connection
Connect to the CERNO network via your computer's Wi-Fi menu. Look for a network named ‘CERNO_XXXX’.
The Wi-Fi password is 'password’
Please note: Some operating systems will warn that the network has no internet connection. This is normal, as the CERNO 4.0 will not connect directly to the internet.
Interfacing with the CERNO
Accessing the CERNO Administration Page
Ensure the CERNO is powered on
Open the internet browser on your device (preferably Google Chrome)
Type 192.168.10.1 into the browser's address bar
Accessing the CERNO Internal Storage
Ensure the CERNO is powered on.
Interface with the CERNO either:
Using network share access
In your file explorer, type \\192.168.10.1 into the address bar
Using FTP
Connect to ftp://192.168.10.1 using any FTP software
Using CERNO File Manager
Access the CERNO Administration Page
Hover over the Settings icon and click on "File Manager"
Inside, you'll see 4 folders: Maps, Plans, Firmware, and Logs
File Manager Interface