Accessing the KALLO Analyzer
The KALLO Analyzer can be found within the Monitor tab in the Ranlytics Dashboard. From there, you can access it in one of two ways.
Direct via the Sidebar
The KALLO Analyzer can be found as the second tab from the top on the left sidebar. From there, you'll need to select a relevant site, level, and location to view a specific device's metrics.
From the Device Page
Navigating to the device page via the Sites view allows you to view device events and information. A button at the top right of the middle information panel allows you to click "View Analytics", bringing you to the KALLO Analyzer focused on that device.
Using the KALLO Analyzer
The KALLO Analyzer is made up of 2 main elements, the Variable Sidebar (left) and the Visualisation Display (right).
The Variable Sidebar
Contains the variables users can utilise to customise their dashboard view. This includes:
Dashboard
Select from a variety of premade dashboard views, including NR/LTE RF Signal, Throughput, Voice, P25, and UMTS RF Signal.
Time Range
Select between 3h, 24h, or 7d intervals, or input a custom timeframe. Please note that timeframes larger than 30d are not supported.
Device Details
Site
Level / Zone
Location
Operators
Select between all available operators found in the site's active configuration. Multiple selection is available.
Technologies
Select between all available technologies found in the site's active configuration. Multiple selection is available.
Bands
Filter to all available bands found in the site's active configuration.
Serving Cell
Filter LTE / NR data to serving cell metrics only.
Dominant Cell
Filter LTE / NR data to dominant cell metrics only.
Channels (UARFCN / EARFCN / ARFCN)
Filter data to one or multiple specific channel numbers.
Physical Cell IDs (PCI)
Filter LTE / NR data to one or multiple specific Physical Cell IDs (PCIs).
Unique Cell IDs (ECI / NCI)
Filter LTE / NR data to one or multiple specific Unique Cell IDs (ECIs / NCIs).
Primary Scrambling Codes (PSC)
Filter UMTS data to one or multiple specific Primary Scrambling Codes (PSCs).
Tasks
Filter throughput, voice, or SMS dashboards to filter to one or multiple specific configuration tasks.
The Visualisation Display
Displays all panels relevant to the selected dashboard, illustrating the selected device's metrics over the selected time period.
Hover over each data point
Interrogate your data in full screen
View statistics across your time range
